Resin Printing Started

So today I have set up the resin printer for the lid and base to be printed to slicer (chitubox) recommend that it would take 6 and half hours to print. The model will be printed in blue resin which will make a good shine and also stand out to the customer. 

127131290_169728931337391_3442705426015798197_njpg

The setting used for this printed is displayed on this image below these have been edited for the best which is what generates the long hours. Since the last update with starting the slicing for the print, I have changed to 0.055mm layer height this was for more fast prototyping. 

enclosure resin3JPG